Home     Blog    News    Ask a Question    Contact

Atmel AT91SAM7S512, AT91SAM7S256, AT91SAM7S128, AT91SAM7S64 and AT91SAM7S321


AT91SAM7Sxxx  AT91SAM7Xxxx  AT91SAM7XCxxx  AT91SAM7SExxx  AT91SAM7A3 
AT91SAM9260  AT91SAM9263  AT91RM9200  AT91SAM9G20  AT91SAM3U  SAM4S16B 
All Supported Chips 

AT91SAM7S256, AT91SAM7S128, AT91SAM7S64 and AT91SAM7S321

 Supported by the Crossware Development Suite for ARM Pathfinder, Developer and Professional Editions

 Graphical Code Creation Wizards:

  • A/D converter (ADC)
  • Embedded Flash Controller (EFC)
  • FIQ interrupt
  • IRQ0 and IRQ1 interrupts
  • Pulse width modulator (PWM)
  • Periodic interval timer (PIT)
  • Ports (PIOA)
  • Power management controller (PMC)
  • Reset controller
  • Serial peripheral interface (SPI)
  • Synchronous serial controller (SSC)
  • System interrupt
  • Timer/counters
  • Two wire interface (TWI)
  • Universal synchronous/asynchronous receiver/transmitters (USART0 and USART1)
  • USB device port (UDP)
  • Watchdog timer

 Context menu Code Creation Wizards:

  • A/D converter (ADC)
  • Advanced interrupt controller (AIC)
  • Embedded Flash Controller (EFC)
  • Memory Controller (MC)
  • Pulse width modulator (PWM)
  • Periodic interval timer (PIT)
  • Ports (PIOA)
  • Power management controller (PMC)
  • Reset controller
  • Real time timer
  • Serial peripheral interface (SPI)
  • Synchronous serial controller (SSC)
  • System interrupt
  • Timer/counters
  • Two wire interface (TWI)
  • Universal synchronous/asynchronous receiver/transmitters (USART0 and USART1)
  • USB device port (UDP)
  • Voltage regulator
  • Watchdog timer

 Source level ARM instruction set simulation

 Peripheral simulation:

  • PLL
  • Advanced interrupt controller
  • Ports
  • Timer/counters
  • Universal synchronous/asynchronous receiver/transmitters (USART0 and USART1)

 Source level on-chip debugging with Jaguar USB JTAG interface


AT91SAM7S512

 Supported as above with the addition of support for a second embedded flash controller