Home     Blog    News    Twitter    Google+    Contact

Atmel AT91SAM7SE512, AT91SAM7SE256 and AT91SAM7SE32


AT91SAM7Sxxx  AT91SAM7Xxxx  AT91SAM7XCxxx  AT91SAM7SExxx  AT91SAM7A3 
AT91SAM9260  AT91SAM9263  AT91RM9200  AT91SAM9G20  AT91SAM3U 
LPC2101/2/3  LPC2104/5/6  LPC21x9  LPC2114/24  LPC2194  LPC213x  LPC214x 
LPC2212/14  LPC2210/20  LPC229x  LPC23xx  LPC2478  LPC29xx 
STR710  STR711  STR712  STR715  STR730  STR731  STR735  STR736  STR750  STR751  STR752  STR755 
STM32F100X4/6/8/B  STM32F101X4/6  STM32F101X8/B  STM32F101XC/D/E  STM32F102X4/6  STM32F102X8/B 
STM32F103X4/6  STM32F103X8/B  STM32F103XC/D/E  STM32F105X8/B/C STM32F107XB/C 
EFM32G200  EFM32G210  EFM32G222  EFM32G230  EFM32G290/280  EFM32G200  EFM32G890/880 
EFM32TG822/840/842  EFM32TG110/210/222/230/232  EFM32TG108 

AT91SAM7SE256 and AT91SAM7SE32

 Supported by the Crossware ARM Development Suite

 Graphical Code Creation Wizards:

  • A/D converter (ADC)
  • Embedded Flash Controller (EFC)
  • External bus interface (EBI)
  • FIQ interrupt
  • IRQ0 and IRQ1 interrupts
  • Pulse width modulator (PWM)
  • Periodic interval timer (PIT)
  • Ports (PIOA, PIOB and PIOC)
  • Power management controller (PMC)
  • Reset controller
  • SDRAM controller
  • Serial peripheral interface (SPI)
  • Synchronous serial controller (SSC)
  • System interrupt
  • Timer/counters
  • Two wire interface (TWI)
  • Universal synchronous/asynchronous receiver/transmitters (USART0 and USART1)
  • USB device port (UDP)
  • Watchdog timer

 Context menu Code Creation Wizards:

  • A/D converter (ADC)
  • Advanced interrupt controller (AIC)
  • Embedded Flash Controller (EFC)
  • External bus interface (EBI)
  • Error corrected code (ECC)
  • Memory Controller (MC)
  • Pulse width modulator (PWM)
  • Periodic interval timer (PIT)
  • Ports (PIOA, PIOB and PIOC)
  • Power management controller (PMC)
  • Reset controller
  • Real time timer
  • Serial peripheral interfaces (SPI0 and SPI1)
  • Synchronous serial controller (SSC)
  • SDRAM controller
  • Static memory controller
  • Timer/counters
  • Two wire interface (TWI)
  • Universal synchronous/asynchronous receiver/transmitters (USART0 and USART1)
  • USB device port (UDP)
  • Voltage regulator
  • Watchdog timer

 Source level ARM instruction set simulation

 Peripheral simulation:

  • PLL
  • Advanced interrupt controller
  • Ports
  • Timer/counters
  • Universal synchronous/asynchronous receiver/transmitters (USART0 and USART1)

 Source level on-chip debugging with Jaguar USB JTAG interface


AT91SAM7SE512

 Supported as above with the addition of support for a second embedded flash controller