Table of Contents        Previous topic       Next topic       

Programming Flash Memory->Saving and Restoring Flash Memory Contents->Restore Memory Image

    

Select Restore Memory Image from the debugger Options menu to open the above dialog box.

Enter a start address in hexadecimal to indicate the address in target memory at which the data in the file should be saved.  Enter the name of the file which contains the data.

Check the Reset and configure target option if the chip selects etc. on the target board need to be reconfigured before the memory range can be written.

When you are ready, click OK and the debugger will load the binary data from the file and save it into the target boards memory, programming it into flash if appropriate.